|
FILTERING CELLS "CM" TYPE |
|
|
They are strong filtering cells at medium
efficiency and they are composed of a labyrinth structure filtering mattress
having several knitted aluminium flat wire layers, kept by two zinc-plated
wire nets (mesh 12x12 mm) and boxed into a 6/10 mm galvanized steel frame. |
|
APPLICATIONS
|
They are used for fan-coil, air treatment
units, warm air generators, ventilation equipement of machines, as prefilters
to filters with higher performances, as filters for hoods and drops
separators. |
|
FEATURES |
According to EN 779
Standards, the filtration classes of these filters is G 2. It is possible to
get different filtering characteristics by changing the number of metallic
layers composing the media and/or moistening the filters by adhesive oils. See the table. |
|
INSTALLATION & SERVICE |
The CM filters can be
installed into C-shaped guides or into holding frames at frontal access.
Replace or regenerate the cells once having reached a resistance of 200 Pa. Clean
by shaking (in case of rough and dry dust) or by counter current air or by
warm water and cleaning agent, then, if necessary, grease again the filter
with adhesive oil. |